| ADM101E | Craft Port(tm) Tiny RS-232 Transceiver to Portable Applications
|
| ADM1041 | Secondary-Side Controller w/Current Share and Housekeeping
|
| ADM1041A | Secondary-Side Controller with Current Share and Housekeeping
|
| ADM1051 | Precision Dual Voltage Regulator Controller
|
| ADM1051A | Precision Dual Voltage Regulator Controllers
|
| ADM1052 | Precision Dual Voltage Regulator Controller
|
| ADM1060 | Multi Power Supply Sequencer & Supervisor
|
| ADM1062 | Super Sequencer(r) with Margining Control and Temperature Monitoring
|
| ADM1063 | Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring
|
| ADM1064 | Super Sequencer(r) with Voltage Readback 12-bit ADC
|
| ADM1065 | Super Sequencer(tm) and Monitor
|
| ADM1066 | Super Sequencer(r) with Margining Control and Auxiliary ADC Inputs
|
| ADM1067 | Super Sequencer(r) with Open-Loop Margining DACs
|
| ADM1068 | Compact Multi- Voltage Sequencer and Supervisor
|
| ADM1069 | Compact Multi- Voltage Sequencer and Supervisor with Margining Control
|
| ADM1070 | - 48 V Hot Swap Controller in SOT-23 with Linear Current Limiting
|
| ADM1073 | -48 V Full Feature Hot Swap Controller
|
| ADM1085 | Voltage Sequencer with Active High, Open-Drain Enable Output
|
| ADM1086 | Voltage Sequencer with Active High, Push-Pull Enable Output
|
| ADM1087 | Voltage Sequencer with Active Low, Open-Drain Enable Output
|
| ADM1088 | Voltage Sequencer with Active Low, Push-Pull Enable Output
|
| ADM1170 | 1.6 V to 16.5 V Hot Swap Controller
|
| ADM1171 | 2.7 V to 16 V Hot Swap Controller with Current Sense Output
|
| ADM1172 | 2.7 V to 16.5 V Hot Swap Controller with Power-Good Comparator
|
| ADM1175 | Hot Swap Controller and Digital Power Monitor with Convert Pin
|
| ADM1176 | Hot Swap Controller and I2c(r) Power Monitor
|
| ADM1177 | Hot Swap Controller and Digital Power Monitor with Soft Start Pin
|
| ADM1178 | Hot Swap Controller and Digital Power Monitor with ALERTB Output
|
| ADM1181A | EMI/EMC Compliant, ±15 kV ESD Protected, RS-232 Line Drivers/Receivers
|
| ADM1184 | 0.8% Accurate Quad Voltage Monitor
|
| ADM1185 | Quad Voltage Monitor and Sequencer
|
| ADM1186 | Quad Voltage Sequencer and Monitor with Programmable Timing
|
| ADM1191 | Digital Power Monitor with Convert Pin and ALERTB Output
|
| ADM1192 | Digital Power Monitor with Clear Pin and ALERT Output
|
| ADM1232 | Microprocessor Supervisory Circuit
|
| ADM13305 | Dual Processor Supervisors with Watchdog
|
| ADM13307 | Triple Processor Supervisors
|
| ADM1385 | High-Speed, 2-Channel RS232/V.28 Interface Devices
|
| ADM1485 | +5V High Speed, Ultra-Low Power EIA RS-485 Transceiver
|
| ADM1486 | +5 V Low Power RS-485 PROFIBUS Transceiver
|
| ADM1487E | 5 V, 128 Nodes, ±15 kV ESD-Protected, 2.5Mbps Half-Duplex Transceiver
|
| ADM1491E | 16 Mbps, ESD Protected, Full-Duplex RS-485 Transceivers
|
| ADM1810 | Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output
|
| ADM1811 | Microprocessor Supervisory in SOT-23 with Open Drain Output Choices
|
| ADM1812 | Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output, Positive Reset Output
|
| ADM1813 | Microprocessor Supervisory in SOT-23 with Active Low Open Drain Output Choices
|
| ADM1815 | Microprocessor Supervisory in SOT-23 with Active Low Push-Pull Output Choices
|
| ADM1816 | Microprocessor Supervisory in SOT-23 with Low Active OpenDrain Output Choices
|
| ADM1817 | Microprocessor Supervisory in SOT-23 with Active High Push-Pull Output
|
| ADM1818 | Microprocessor Supervisory in SOT-23 with Manual Push Button Option
|
| ADM202 | +5V, 0.1 µF CMOS RS-232 200kBPS Transceiver with 2 Drivers & 2 Receivers
|
| ADM202E | EMI/EMC Compliant, ±15 kV ESD Protected, RS-232 Line Drivers/Receivers
|
| ADM203 | High Speed, +5 V, 0.1 µF CMOS RS-232 Driver/Receiver
|
| ADM206 | 0.1 µF, +5V CMOS RS-232 200kBPS Transceiver with 4 Drivers, 3 Receivers, a Shutdown Pin and an Enable Pin
|
| ADM206E | EMI/EMC Compliant, 615 kV ESD Protected, RS-232 Line Driver/Receiver in a 24-Pin SO Package
|
| ADM207 | 0.1 µF, +5V CMOS RS-232 200kBPS Transceiver with 5 Drivers & 3 Receivers
|
| ADM207E | EMI/EMC Compliant, ±15kV Protected, 230kBPS, RS-232 Transceiver with 5 Drivers & 3 Receivers
|
| ADM208 | 0.1 µF, +5V CMOS RS-232 200kBPS Transceiver with 4 Drivers & 4 Receivers
|
| ADM208E | EMI/EMC Compliant, ±15kV Protected, RS-232 230kBPS Transceiver with 4 Drivers & 4 Receivers
|
| ADM209 | 0.1 µF, +5V CMOS RS-232 200kBPS Transceiver with 3 Drivers, 5 Receivers & an Enable pin
|
| ADM211 | 0.1 µF, +5V CMOS RS-232 200kBPS Transceiver with 4 Drivers, 5 Receivers
|
| ADM211E | EMI/EMC Compliant, ±15kV Protected, RS-232 230kBPS Transceiver with 4 Drivers, 5 Receivers and Shutdown and Enable Pins
|
| ADM213 | 0.1 µF, +5V CMOS RS-232 200kBPS Transceiver with 4 Drivers, 5 Receivers, Shutdown and Enable Pins and 2 Receivers Active in Shutdown
|
| ADM213E | EMI-EMC-Compliant, 15 kV ESD Protected, RS-232 Line Drivers/Receivers
|
| ADM2209E | World's Smallest Dual-Port 6 Tx/10 Rx RS-232
|
| ADM222 | High Speed, +5V, 0.1 µF CMOS RS-232 Transceiver with 2 Drivers, 2 Receivers, 200kBPS Data Rate and a Shutdown Pin
|
| ADM231L | Low Power, +5V CMOS RS-232 Transceiver with 2 Drivers and 2 Receivers
|
| ADM232A | High-Speed, 5 V, 0.1 µF CMOS RS-232 Driver/Receiver Available in 16-lead DIP& in Both Narrow and Wide SOIC Packages
|
| ADM232L | Low Power, +5V CMOS RS-232 100kBPS Transceiver with 2 Drivers/Receivers
|
| ADM233L | Low Power, +5V CMOS RS-232 120kBPS Transceiver with 2 Drivers & 2 Receivers. No External Capacitors Required
|
| ADM234L | Low Power, +5V CMOS RS-232 100kBPS Quad Driver
|
| ADM236L | Low Power, +5V CMOS RS-232 100kBPS Transceiver with 4 Drivers, 3 Receivers and Shutdown and Enable Pins
|
| ADM237L | Low Power, +5V CMOS RS-232 100kBPS Transceiver with 5 Drivers and 3 Receivers
|
| ADM238L | Low Power, +5V CMOS RS-232 100kBPS Transceiver with 4 Drivers and 4 Receivers
|
| ADM239L | Low Power, +5V CMOS RS-232 100kBPS Transceiver with 3 Drivers, 5 Receivers and an Enable Pin
|
| ADM241L | Low Power, +5V CMOS RS-232 100kBPS Transceiver with 4 Drivers, 5 Receivers, Shutdown and Enable Pins
|
| ADM242 | High Speed, +5V, 0.1 µF CMOS RS-232 200kBPS Transceiver with 2 Drivers, 2 Receivers, Shutdown and Enable Pins
|
| ADM2482E | Signal Isolated RS-485 Transceiver Full/Half Duplex w/ Transformer Driver
|
| ADM2483 | Slew-Rate Limited Isolated RS-485 Transceiver
|
| ADM2484E | Signal Isolated RS-485 Transceiver Full/Half Duplex
|
| ADM2485 | High Speed, Isolated RS-485 Transceiver with Integrated Transformer Driver
|
| ADM2486 | iCoupler(r) High Speed Isolated RS-485 Tranceiver
|
| ADM2487E | Signal Isolated RS-485 Transceiver Full/Half Duplex w/ Transformer Driver
|
| ADM2490E | High Speed ESD Protected Full-Duplex iCoupler(r) Isolated RS-485 Transceiver
|
| ADM2491E | Signal Isolated RS-485 Transceiver Full/Half Duplex
|
| ADM2582E | Signal and Power Isolated RS-485 Transceiver
|
| ADM2587E | Signal and Power Isolated RS-485 Transceiver
|
| ADM2914 | Quad UV/OV Positive/Negative Voltage Supervisor
|
| ADM3070E | 3.3V ±15kV ESD Protected Full Duplex Driver/Receiver Enable Transceiver w/250kbps Data Rate
|
| ADM3071E | 3.3V ±15kV ESD Protected Full Duplex Transceiver w/250kbps Data Rate
|
| ADM3072E | 3.3V ±15kV ESD Protected Half Duplex Driver/Receiver Enable Transceiver w/250kbps
|
| ADM3073E | 3.3V ±15kV ESD Protected Full Duplex Driver/Receiver Enable Transceiver w/500kbps
|
| ADM3074E | 3.3V ±15kV ESD Protected Full Duplex Transceiver w/500kbps
|
| ADM3075E | 3.3V ±15kV ESD Protected Half Duplex Driver/Receiver Enable Transceiver w/500kbps
|
| ADM3076E | 3.3V ±15kV ESD Protected Full Duplex Driver/Receiver Enable Transceiver w/16Mbps
|
| ADM3077E | 3.3V ±15kV ESD Protected Full Duplex Transceiver w/16Mbps
|
| ADM3078E | 3.3V ±15kV ESD Protected Half Duplex Driver/Receiver Enable Transceiver w/16Mbps
|
| ADM3082 | High-Speed Fail-Safe, RS-485/RS-422 Transceiver
|
| ADM3085 | High-Speed, Fail-Safe, RS-485/RS-422 Transceiver
|
| ADM3088 | High-Speed(10Mbps), Fail-Safe, RS-485/RS-422 Transceiver
|
| ADM3101E | ±15 kV ESD Protected, 3.3 V Single-Channel RS-232 Line Driver/Receiver
|
| ADM3202 | High-Speed, 2-Channel RS232/V.28 Interface Devices
|
| ADM3222 | High-Speed, +3.3V, 2-Channel RS232/V.28 Interface Device with 460kBPS Data Rate and Shutdown and Enable Pins
|
| ADM3232E | ±15 kV ESD Protected, 3.3 V, RS-232 Line Driver/Receiver
|
| ADM3251E | Isolated Single Channel RS-232 Line Driver/Receiver
|
| ADM3307E | +2.7V Serial Port RS-232 Transceiver (5 Drivers / 3 Receivers) with 15kV ESD (TTL & RS-232)
|
| ADM3310E | +2.7 V Serial Port RS-232 Transceiver (3 Drivers / 5 Receivers) with 15kV ESD
|
| ADM3311E | 3-V, RS-232 Serial Port Driver-Receiver
|
| ADM3312E | +2.7V Serial Port RS-232 Transceiver (3 Drivers / 3 Receivers) with 15kV ESD
|
| ADM3315E | 15kV ESD Protected,+2.7V to +3.6V Serial Port Transceiver w/ Green Idle(tm)
|
| ADM3483 | 3.3 V Slew Rate Limited Half - Duplex Low Power Tranceiver
|
| ADM3483E | 3.3 V, ±15 kV ESD-Protected, 250kbps Half-Duplex Transceiver
|
| ADM3485 | 3.3 V Half Duplex Low Power Transceiver
|
| ADM3485E | ESD Protected, EMC Compliant, 3.3V, 12 Mbps, EIA RS-485 Transceiver
|
| ADM3486E | 3.3 V, ±15 kV ESD-Protected, Half-Duplex Transceiver
|
| ADM3488 | 3.3 V Slew - Rate Limited, Full Duplex Low Power Transceiver
|
| ADM3488E | 3.3 V, ±15 kV ESD-Protected, 250kbps Full-Duplex Transceiver
|
| ADM3490 | 3.3 V Full - Duplex Low Power Transceiver
|
| ADM3490E | 3.3 V, ±15 kV ESD-Protected, Full-Duplex Transceiver
|
| ADM3491 | 3.3V, Full Duplex, 10Mbps, EIA RS-485 Transceiver
|
| ADM3491-1 | 3.3V, Full Duplex, 840uA, 20Mbps, EIA RS-485 Transceiver
|
| ADM3491E | 3.3 V, ±15 kV ESD-Protected, Full-Duplex Transceiver Featuring Enable Inputs for the Driver & Receiver
|
| ADM3493 | 3.3 V Slew Rate Limited, Half Duplex RS-485/RS-422 Transceiver
|
| ADM4073 | Low Cost, Voltage Output, High-side Current Sense Amplifier
|
| ADM4210 | Low Voltage Hot Swap Controller in 6-pin TSOT Package
|
| ADM483 | 5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver
|
| ADM483E | ±15 kV ESD Protected, Slew Rate Limited, 5 V, RS-485 Transceiver
|
| ADM485 | +5 V Low Power EIA RS-485 Transceiver
|
| ADM4850 | Half Duplex RS-485/RS-22 Transceiver w/115kbps Data Rate
|
| ADM4851 | Half Duplex RS-485/RS-22 Transceiver w/500kbps Data Rate
|
| ADM4852 | Half Duplex RS-485/RS-22 Transceiver w/2.5Mbps Data Rate
|
| ADM4853 | Half Duplex RS-485/RS-22 Transceiver w/10Mbps Data Rate
|
| ADM4854 | Full Duplex RS-485/RS-22 Transceiver w/115kbps Data Rate
|
| ADM4855 | Full Duplex RS-485/RS-22 Transceiver w/500kbps Data Rate
|
| ADM4856 | Full Duplex RS-485/RS-22 Transceiver w/2.5Mbps Data Rate
|
| ADM4857 | Full Duplex RS-485/RS-422 Transceiver w/10Mbps Data Rate
|
| ADM485E | 5 V, 32 Nodes, ±15 kV ESD-Protected, 2.5Mbps Half-Duplex Transceiver
|
| ADM487E | 5 V, 128 Nodes, ±15 kV ESD-Protected, 250kps Half-Duplex Transceiver
|
| ADM488 | Low Power, Slew Rate Limited RS-485
|
| ADM489 | Low Power, Slew Rate Limited RS-485, Contains an Additional Receiver and Driver Enable Control
|
| ADM5170 | Octal Line Driver Suitable for Digital Communication Systems with Data Rates up to 116 kB/s
|
| ADM5180 | Octal, Differential Line Receiver Suitable for a Wide Range of Digital Communciation Systems with Data Rates up to 200 k/Bs
|
| ADM560 | Ultralow Power, Active Low Shutdown and Active High Receiver Enable
|
| ADM561 | Ultralow Power, Active High Shutdown and an Active Low Receiver Enable
|
| ADM6315 | Open-Drain Microprocessor Supervisory Circuit in 4-Lead SOT-143
|
| ADM6316 | Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23
|
| ADM6318 | Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23
|
| ADM6319 | Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23
|
| ADM6320 | Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23
|
| ADM6321 | Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23
|
| ADM6322 | Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23
|
| ADM6339 | Quad Voltage Microprocessor Supervisory Circuit
|
| ADM6384 | Microprocessor Supervisory Circuit in 4-Lead SC70
|
| ADM660 | CMOS Switched-Capacitor Voltage Converter
|
| ADM6710 | Low Voltage, High Accuracy, Triple/Quad Voltage Microprocessor Supervisory Circuit
|
| ADM6711 | Microprocessor Supervisory Circuit in 4-Lead SC70
|
| ADM6713 | Microprocessor Supervisory Circuit in 4-Lead SC70
|
| ADM6819 | FET Drive Simple Sequencer(tm) w/Fixed 200ms Delay
|
| ADM6820 | FET Drive Simple Sequencer(tm) w/Capacitor Adjustable Delay
|
| ADM6821 | Low Voltage Supervisory Circuit with Watchdog, Manual Reset and Active-High, Push-Pull Reset Output
|
| ADM6822 | Low Voltage Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Open-Drain Reset Output
|
| ADM6823 | Low Voltage Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Push-Pull Reset Output
|
| ADM6824 | Low Voltage Supervisory Circuit with Watchdog Timer
|
| ADM6825 | Low Voltage Supervisory Circuit with Manual Reset
|
| ADM690 | Functions: 4.65 V Reset, Battery Switchover, Watchdog Timer, Power Fail Input
|
| ADM690A | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.65V Threshold Voltage, Active Low Reset
|
| ADM691 | µP Supervisor with Backup Battery Switchover, 50 ms Nominal Adjustable Reset Period, Adjustable Watchdog Period, Chip Enable Signals, 4.65V Threshold Voltage, Watchdog, Backup Battery and Low Vcc Status O/Ps and 100mA Output Current
|
| ADM691A | µP Supervisor with Backup Battery Switchover, Adjustable Reset and Watchdog Periods, Chip Enable Signals, 4.65V Threshold Voltage, Watchdog, Battery Backup and Low Vcc Status O/Ps and 250mA Output Current
|
| ADM692 | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, Active Low Reset and 100mA Output Current
|
| ADM692A | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, Active Low Reset and 250mA Output Current
|
| ADM693 | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, 100mA Output Current
|
| ADM693A | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, 250mA Output Current
|
| ADM694 | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.65V Threshold Voltage, Active Low Reset and 100mA Output Current
|
| ADM695 | µP Supervisor with Backup Battery Switchover, Adjustable Reset Period
|
| ADM696 | µP Supervisor with Backup Battery Switchover, Adjustable Low Line Voltage Monitor, Adjustable Watchdog Timer, Low Line, Power Fail and Watchdog Status Outputs and 100mA Output Current
|
| ADM697 | µP Supervisor with Chip Enable Signals, Adjustable Low Line Voltage Monitor, Adjustable Watchdog Timer, Low Line, Power Fail and Watchdog Status Outputs and 100mA Output Current
|
| ADM698 | Microprocessor Supervisory Circuit
|
| ADM699 | Microprocessor Supervisory Circuits
|
| ADM705 | Low Cost Microprocessor Supervisory Circuit
|
| ADM706 | 3 V, Voltage Monitoring Microprocessor Supervisory Circuit
|
| ADM707 | Low Cost Microprocessor Supervisory Circuit
|
| ADM708 | 3 V, Voltage Monitoring Microprocessor Supervisory Circuit
|
| ADM709 | Power Supply Monitor with Reset
|
| ADM800 | µP Supervisor , Adjustable Reset and Watchdog Periods
|
| ADM802 | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V/4.65V Threshold Voltage with ±2% Accuracy, Active Low Reset and 250mA Output Current
|
| ADM803 | Microprocessor Supervisory Circuit in 3-Lead SC70, Active-Low Open-Drain Output
|
| ADM805 | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V/4.65V Threshold Voltage, Active High Reset and 250mA Output Current
|
| ADM809 | Microprocessor Supervisory Circuit in 3-Lead SOT-23 & SC70, Active-Low Push-Pull Output
|
| ADM810 | Microprocessor Supervisory Circuit in 3-Lead SOT-23 & SC70, Active-High Push-Pull Output
|
| ADM811 | Microprocessors Supervisory Circuit in 4-Lead SOT-143, Logic Low RESET Bar Output
|
| ADM812 | Microprocessors Supervisory Circuit in 4-Lead SOT-143, Logic High RESET Output
|
| ADM823 | Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23
|
| ADM824 | Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23
|
| ADM825 | Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23
|
| ADM8616 | Low Voltage Supervisory Circuit with Watchdog in 4-Lead SC70
|
| ADM8617 | Low Voltage Supervisory Circuit with Watchdog in 4-Lead SC70 (Active-low with an Open-Drain Output)
|
| ADM8660 | CMOS Switched-Capacitor Voltage Converter w/ Low Power Shutdown Pin
|
| ADM8690 | uP Supervisory Circuit, 8-Pin DIP
|
| ADM8691 | µP Supervisory Circuit
|
| ADM8692 | µP Supervisor , Watchdog Feature, Power Fail Warning
|
| ADM8693 | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, 100mA Output Current. Upgrade for ADM693 with Reduced Power Consumption and Faster Gating of Chip Enable Signals
|
| ADM8694 | µP Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.65V Threshold Voltage, Active Low Reset and 100mA Output Current. Upgrade for ADM692 with Reduced Power Consumption
|
| ADM8695 | µP Supervisor with Backup Battery Switchover, 200ms Nominal Adjustable Reset Period, Adjustable Watchdog Period, Chip Enable Signals, 4.65V Threshold Voltage, Watchdog, Backup Battery and Low Vcc Status O/Ps. Upgrade for ADM695
|
| ADM8696 | µP Supervisory Circuit
|
| ADM8697 | µP Supervisor with Chip Enable Signals, Adjustable Low Line Voltage Monitor, Adjustable Watchdog Timer, Low Line, Power Fail and Watchdog Status Outputs, Reduced Power Consumption. Upgrade for ADM697
|
| ADM8698 | µP Supervisory Circuit with 4.65V Threshold Voltage, Low Supply Current and Active Low Reset Output. Upgrade for ADM698
|
| ADM8699 | µP Supervisory Circuit with Watchdog Feature, 4.65V Threshold Voltage, Low Supply Current and Active Low Reset Output. Upgrade for ADM699
|
| ADM869L | 2 A, High-Side P-Channel Switch with Current Limit and Thermal Shutdown
|
| ADM8828 | Switched-Capacitor Voltage Inverter with Shutdown
|
| ADM8829 | Switched Capacitor Voltage Inverter
|
| ADM8830 | Please see the ADM8832.
|
| ADM8832 | Charge Pump Regulator for Color TFT Panel
|
| ADM8839 | Charge Pump Regulator for Color TFT Panel
|
| ADM8843 | Four White LED Backlight Driver
|
| ADM8845 | Charge Pump Driver for 6 White LED LCD Backlights
|
| ADM9240 | Complete System Hardware Monitor for uProcessor-Based Systems
|
| ADM9264 | Quad Power Supply Monitor for Desktop PCs
|
| ADM9690 | Power Supply and Watchdog Timer Monitoring Circuit
|
| ADMP401 | iMEMS(r) Microphone Omni Directional Microphone with Bottom Port and Analog Output
|
| ADMP421 | iMEMS(r) Microphone Omni Directional Microphone with Bottom Port and Digital Output
|
| ADMTV102 | RF Tuner IC for DVB-H, DVB-T, and DMB-TH
|
| ADMTV201 | Low Power Mobile TV Tuner IC for ISDB-T
|
| ADMTV202 | Low Power Mobile TV Tuner IC for ISDB-T
|
| ADMTV300 | Low-IF tuner IC for T-DMB, DAB & FM
|
| ADMTV315 | Mobile TV One-chip Receiver for T-DMB/DAB/FM
|
| ADMTV316 | Mobile TV Dual-Channel One-chip Receiver for T-DMB/DAB/FM
|
| ADMTV340 | Zero-IF Mobile TV Tuner IC for CMMB
|
| ADMTV800 | UHF/S-Band Tuner IC for CMMB
|
| ADMTV803 | VHF/UHF Tuner IC for Multi-Standard Digital TV
|
